Your heating bill doesn’t have to spike every time temperatures drop. When New Braunfels sees those cold fronts roll through—temperatures hitting the low 30s for days—your system either keeps up or it doesn’t. And if it’s struggling, you’re paying for it twice: once in discomfort, again when that utility bill arrives.
Modern heat pumps transfer heat instead of generating it, which is why they can cut your heating costs by up to 40% compared to older furnaces or electric resistance systems. That’s real money back in your account every month. Plus, with federal tax credits covering up to 30% of installation costs in 2026, the upfront investment gets a lot easier to justify.
The right system does more than heat your home. It maintains consistent temperatures in every room, handles humidity during our muggy stretches, and runs quietly in the background. No more cold spots in the back bedrooms. No more cranking the thermostat and hoping for the best.
We’ve been serving New Braunfels and the surrounding Hill Country for over 20 years. We’re veteran-owned, which means we show up when we say we will, do the work right the first time, and don’t disappear after the install.
Our technicians know what Central Texas weather does to HVAC systems. The heat, the cold snaps, the humidity—it all takes a toll. We’ve seen what works and what fails, and we size and install every system based on your home’s actual needs, not what’s easiest to sell.
We operate across San Antonio, Austin, and Houston, but New Braunfels is home. We’re here 24/7 for emergencies because we know how fast things can go wrong when a cold front hits at midnight. You’re not getting a call center. You’re getting certified technicians who live and work in this area.
First, we come to your home and assess what you actually need. We measure your square footage, check your insulation, look at your ductwork, and calculate the heating load. This isn’t a 10-minute walkthrough—it’s a real evaluation so we can recommend the right size system.
Once you approve the quote, we schedule the install at a time that works for you. Our crew shows up on time, preps the work area, and removes your old system if needed. Then we install the new heat pump or furnace, connect it to your existing ductwork (or upgrade ducts if necessary), and test everything to make sure it’s running efficiently.
Before we leave, we walk you through the new system. How to use the thermostat, what to listen for, when to call us. We also register your warranty and set you up with a maintenance plan if you want one. Most installs take one day, though larger homes or complex setups might need two.
Ready to get started?
Every heating system installation in New Braunfels, TX includes a full load calculation to size your system correctly. Undersized systems run constantly and wear out fast. Oversized systems short-cycle and waste energy. We get it right from the start.
You also get a complete ductwork inspection. Leaky ducts can waste 20-30% of your heated air before it even reaches your rooms. If we find issues, we’ll tell you what needs sealing or replacement. We don’t upsell—we just let you know what’s costing you money.
We install high-efficiency heat pumps that work in Texas heat and cold. These aren’t the old units that struggled below 40 degrees. Modern systems deliver strong heat even when it’s freezing outside, and they cool just as well when summer pushes past 95. One system, year-round comfort.
New Braunfels homeowners also benefit from our 24/7 emergency service. If something goes wrong after hours or during a holiday, we’re available. And with federal tax credits available for qualifying systems installed in 2026, this is one of the best times to upgrade. We handle all the paperwork and make sure you get every dollar you’re entitled to.
Most residential heating system installations in New Braunfels, TX run between $4,500 and $12,000 depending on the system type, size, and complexity of the install. A basic furnace replacement in a smaller home with existing ductwork sits on the lower end. A high-efficiency heat pump for a larger home with duct upgrades lands on the higher end.
The federal tax credit can cover up to 30% of your total installation cost if you choose a qualifying high-efficiency heat pump in 2026. That’s a significant reduction in upfront cost. We provide detailed quotes before any work begins, so there’s no confusion about what you’re paying for.
Keep in mind that cheaper isn’t always better. An improperly sized or poorly installed system will cost you more in energy bills and repairs over time than you saved upfront. We focus on getting the install right so your system lasts 15-20 years with proper maintenance.
A furnace generates heat by burning fuel (usually natural gas) or using electric resistance coils. A heat pump transfers heat from outside air into your home, even when it’s cold out. Heat pumps are more energy-efficient because moving heat takes less energy than creating it.
In New Braunfels, TX, heat pumps make a lot of sense. Our winters are mild enough that modern heat pumps handle the cold without backup heat most of the time. They also cool your home in summer, so you’re getting both heating and air conditioning in one system. That simplifies maintenance and reduces installation costs compared to separate systems.
Furnaces still have a place, especially if you already have gas lines and prefer that fuel source. But for most homeowners looking to lower energy bills and reduce their carbon footprint, heat pumps deliver better long-term value. We’ll walk through both options during your consultation and let you decide what fits your priorities.
Most heating system installations in New Braunfels, TX take one full day. We typically start in the morning and finish by late afternoon. Larger homes or installs that require significant ductwork modifications might stretch into a second day, but we’ll tell you the timeline upfront.
The process includes removing your old system, installing the new unit, connecting it to your ductwork and electrical, testing all functions, and walking you through operation. We don’t rush. A proper install requires attention to detail—sealing connections, checking refrigerant levels, calibrating thermostats, and verifying airflow.
You’ll have heat the same day we start in most cases. If we run into unexpected issues like damaged ducts or electrical problems, we’ll explain what needs fixing and how it affects timing. Transparency matters. You’re never left guessing when your heat will be back on.
Yes, if your current system is over 10 years old or struggling to keep up. Older furnaces and heat pumps lose efficiency over time. A modern high-efficiency heat pump can reduce your heating costs by 30-50% compared to electric resistance heating and 20-30% compared to an older gas furnace.
Recent winter events in New Braunfels showed just how much inefficient systems cost. When temperatures stayed below freezing for extended periods, some homeowners saw their energy usage jump 146%, adding $30-40 to monthly bills. A properly sized, energy-efficient system keeps your home comfortable without those spikes.
The average Texas homeowner saves more than $300 annually after switching to a heat pump. Over the 15-20 year lifespan of the system, that’s $4,500 to $6,000 back in your pocket. Add in the federal tax credit covering 30% of installation costs, and the return on investment becomes hard to ignore.
Yes. We provide 24/7 emergency heating repair throughout New Braunfels, TX and the surrounding Hill Country. When your heat goes out at 2 a.m. during a cold snap, waiting until Monday morning isn’t an option. We keep technicians on call specifically for these situations.
Emergency service means we diagnose the problem, explain your options, and get your heat running again as quickly as possible. Sometimes that’s a simple fix like a tripped breaker or clogged filter. Other times it’s a failed component that needs replacement. We carry common parts on our trucks to minimize downtime.
If your system is beyond repair or the cost to fix it approaches the cost of replacement, we’ll be honest about it. We’re not going to patch together a dying system just to buy a few more months. But if a repair makes sense, we’ll get it done right and get you warm again.
Sizing a heating system correctly requires a load calculation based on your home’s square footage, insulation, windows, ceiling height, and local climate. This isn’t something you can estimate by square footage alone. A 2,000-square-foot home with poor insulation needs a different system than the same size home with new windows and attic insulation.
We perform a Manual J load calculation for every install. It’s the industry standard and the only way to get sizing right. Too small, and your system runs constantly, wears out early, and never quite keeps up on the coldest days. Too large, and it short-cycles, wastes energy, and creates uneven temperatures.
In New Braunfels, TX, we also factor in your cooling needs since most systems handle both. A heat pump sized for efficient heating will also cool your home effectively during our long, hot summers. The goal is one properly sized system that handles everything without working harder than it needs to.
Local Resources
Other Services we provide in New Braunfels
Call Now
