Heating System Installation in Floresville, TX

Stay Warm When Texas Weather Turns Cold

We’re a licensed heat pump installer with over 20 years of experience serving Floresville homes. We offer transparent pricing, federal tax credits, and systems built to last.
A construction worker wearing a hard hat and tool belt uses a power drill to install or repair plumbing pipes and valves in a partially finished room with exposed pipes and wiring, typical of TX HVAC services in San Antonio projects.
A person in work clothes and a cap adjusts the settings on a wall-mounted boiler while holding a tablet, surrounded by red and blue insulated pipes in a tiled room, representing expert HVAC Services in San Antonio.

Professional Heating Installation Services in Floresville

Lower Energy Bills and Reliable Winter Comfort

Texas winters are unpredictable. One day you’re in the mid-60s, the next morning you’re waking up to temperatures in the low 30s. When that happens, you need a heating system that works without hesitation.

A properly installed heat pump or furnace does more than keep your family warm. It cuts your energy costs by up to 70% compared to older, inefficient systems. That’s real money back in your pocket every month, not just during the coldest weeks of winter.

You also get peace of mind. No more wondering if your system will make it through another season. No more emergency calls at 2 a.m. because the heat went out overnight. Just consistent, reliable warmth when you need it most.

Modern heating systems we install in Floresville, TX also qualify for federal tax credits up to $2,000 through 2032. That’s not a rebate you apply for and hope to get. It’s a direct credit on your taxes for choosing high-efficiency equipment that meets Energy Star standards.

HVAC Contractor Serving Floresville, TX

Veteran-Owned, Locally Trusted for Over 20 Years

We’ve been installing heating systems across San Antonio, Austin, Houston, and surrounding areas like Floresville for more than two decades. We’re veteran-owned, which means we approach every job with discipline, integrity, and a commitment to doing it right the first time.

Floresville homeowners face unique challenges. Older homes often need ductwork modifications or electrical panel upgrades before a new system can go in. We handle all of that. We also understand that most people in this area need both heating and cooling, which is why heat pumps have become the go-to solution for year-round comfort in a single system.

Our technicians are licensed, certified, and insured. We don’t send rookies to your home. Every installation is backed by comprehensive warranties on parts and labor, and we’re available 24/7 if something goes wrong. You’re not just getting a new heating system. You’re getting a team that stands behind the work long after installation day.

A man wearing work clothes and gloves kneels on the floor, repairing a white radiator. He’s equipped with a tool belt and various tools, including a cordless drill, in a bright, modern room—perfect for HVAC services in San Antonio, TX.

Residential Heating System Installation Process

What to Expect From Start to Finish

First, we come to your home and assess what you actually need. That means looking at your square footage, insulation, ductwork, and electrical capacity. A 2,500-square-foot home in Floresville typically needs a 3.5 to 4-ton system, but we don’t guess. We calculate the load properly so you’re not paying for equipment that’s too big or dealing with a system that’s too small.

Next, we give you a transparent quote. No hidden fees. No surprise charges after the work is done. You’ll know exactly what the installation costs, what equipment we’re using, and what warranties apply. If your home needs ductwork modifications or an electrical upgrade, we’ll include that in the estimate upfront.

Installation usually takes one to two days depending on the complexity of the job. We remove your old system, install the new equipment, test everything to make sure it’s running at peak efficiency, and walk you through how to use your new thermostat and system controls. Before we leave, you’ll have heat, and you’ll know exactly how to keep it running smoothly for the next 15 to 20 years.

Ready to get started?

Explore More Services

About Texas Air Repair

Heat Pump Installer in Floresville, TX

What's Included in Your Heating System Installation

You get a complete system designed for Floresville’s climate. That includes the outdoor unit, indoor air handler or furnace, thermostat, and all necessary refrigerant lines and electrical connections. If you’re installing a heat pump, you’re getting both heating and cooling in one system, which is why they’ve become the most popular choice for Texas homeowners.

We also handle permits and inspections. Every installation meets Texas building codes, and we coordinate with local inspectors to make sure everything is approved. You don’t have to worry about any of that.

Floresville homes built before 2000 often need ductwork modifications. Older ducts weren’t designed for modern high-efficiency systems, and leaks or poor insulation can waste up to 30% of your heated air. We seal and insulate ducts as part of the installation process when needed, which protects your investment and keeps your energy bills low.

If your electrical panel can’t handle the new system, we’ll upgrade it. Most modern heat pumps and furnaces require a dedicated 240-volt circuit, and older panels don’t always have the capacity. We bring in licensed electricians to handle that work so everything is safe and up to code.

A person is using a red-handled wrench to adjust copper pipes on a boiler or heating system, with a pressure gauge and red valve visible—a common sight during HVAC services in San Antonio, TX.

How much does heating system installation cost in Floresville, TX?

Most homeowners in Floresville pay between $6,500 and $15,000 for a complete heating system installation. That range depends on the size of your home, the efficiency rating of the equipment you choose, and whether your home needs ductwork or electrical upgrades.

Entry-level heat pumps with a 14 SEER rating start around $4,200 to $6,500 for smaller homes. Mid-range systems with higher efficiency ratings typically run $7,000 to $10,000 installed. If you’re looking at top-tier equipment with variable-speed technology and the highest SEER ratings, expect to pay closer to $12,000 to $15,000.

Older homes often add $2,000 to $4,000 for ductwork modifications and another $1,500 to $3,000 for electrical panel upgrades. We include all of that in your quote upfront so there are no surprises. You’ll also want to factor in federal tax credits up to $2,000 for qualifying Energy Star systems, which brings your net cost down significantly.

Heat pumps make more sense for most Floresville homeowners. Texas winters are mild enough that heat pumps can handle the heating load efficiently, and you get air conditioning in the same system for summer. That means one installation, one set of maintenance costs, and lower energy bills year-round.

Furnaces are a better fit if you already have a separate air conditioning system and just need to replace the heating side. They’re also the right call if your home uses natural gas and you want to stick with that fuel source. Gas furnaces heat faster than heat pumps when temperatures drop into the 20s, but Floresville rarely sees sustained cold like that.

Heat pumps cut energy costs by up to 70% compared to running separate heating and cooling systems. They also qualify for federal tax credits, which furnaces typically don’t unless they’re ultra-high-efficiency models. If you’re starting from scratch or replacing both systems at once, a heat pump is almost always the smarter investment.

Most installations take one to two days. If your home is ready to go—meaning the ductwork is in good shape, the electrical panel has capacity, and we’re doing a straightforward equipment swap—we can often finish in a single day.

More complex jobs take longer. If we’re modifying ductwork, upgrading your electrical panel, or installing a system in a home that’s never had central heating before, expect two full days. We don’t rush the work. Every connection has to be tight, every refrigerant line has to be properly charged, and every safety check has to pass before we consider the job done.

You’ll have heat the same day we finish. We test the system thoroughly before we leave, and we walk you through how to use your new thermostat and controls. If anything feels off or you have questions after we’re gone, we’re available 24/7 to come back and make it right.

A 2,500-square-foot home in Floresville typically needs a 3.5 to 4-ton system. Smaller homes around 1,500 square feet usually need 2 to 2.5 tons. Larger homes over 3,000 square feet often require 4 to 5 tons. But those are rough estimates. The only way to know for sure is to calculate the heating load based on your home’s specific characteristics.

We look at insulation levels, window quality, ceiling height, and how well your ductwork is sealed. A poorly insulated home needs more heating capacity than a well-insulated one, even if they’re the same square footage. Homes with a lot of windows or high ceilings also need larger systems to maintain consistent temperatures.

Oversized systems waste energy and create comfort problems. They cycle on and off too frequently, which wears out components faster and leaves cold spots throughout your home. Undersized systems run constantly and never quite catch up on cold days. We size your system correctly the first time so you get the efficiency and comfort you’re paying for.

If you install a qualifying Energy Star heat pump, you can claim up to $2,000 in federal tax credits through 2032. That’s a direct credit on your tax return, not a deduction. It reduces what you owe dollar for dollar, which makes a significant dent in your total installation cost.

The system has to meet specific efficiency standards to qualify. For heat pumps, that means a SEER2 rating of at least 16 and an HSPF2 rating of at least 9. Most mid-range and high-efficiency systems we install meet those requirements. We’ll let you know during the estimate process which equipment qualifies and provide the documentation you need for your taxes.

Gas furnaces can also qualify, but the efficiency requirements are higher. You need an AFUE rating of at least 97%, which limits your options to top-tier models. Heat pumps are usually the better choice in Floresville because they handle both heating and cooling, and the tax credit applies to the entire system, not just the heating side.

A professionally installed heating system in Floresville should last 15 to 20 years with regular maintenance. Heat pumps tend to land on the shorter end of that range because they run year-round for both heating and cooling. Furnaces that only run a few months a year can push past 20 years if they’re maintained properly.

The quality of the installation matters more than most people realize. A system that’s improperly sized, poorly charged with refrigerant, or installed with leaky ductwork will fail years earlier than it should. That’s why we take the time to do load calculations, pressure tests, and airflow measurements on every job. Cutting corners during installation costs you thousands in premature replacements down the road.

Regular maintenance extends the life of your system significantly. That means changing filters every three months, scheduling annual tune-ups, and addressing small issues before they turn into major repairs. We offer maintenance plans that keep your system running efficiently and catch problems early. Most of the systems we installed 15 years ago are still running strong because the homeowners stayed on top of maintenance.

Other Services we provide in Floresville

Call Now