Your next utility bill will be lower. That’s what happens when you switch from a traditional HVAC system to a properly installed heat pump in Shavano Park, TX.
Heat pumps don’t burn fuel or use resistance heating. They move heat from one place to another, which uses up to 65% less electricity than what you’re probably running now. In a 2,600+ square foot home—the average size in Shavano Park—that difference adds up fast.
You get both heating and cooling from one system. No more juggling separate units or dealing with aging equipment that breaks down when you need it most. Heat pumps are built for Texas weather—they handle our hot summers efficiently and provide plenty of warmth during mild winter months. Since Shavano Park rarely sees temperatures below 30°F, a heat pump keeps you comfortable all year without backup systems or emergency service calls.
Most homeowners see their investment pay for itself within a few years through energy savings alone. Add in the federal tax credit—30% back on your total installation cost, up to $2,000—and the math gets even better.
Texas Air Repair has been keeping San Antonio-area families comfortable for over 30 years. We’re a veteran-owned HVAC company that serves Shavano Park, TX with the same attention to detail and commitment we learned in service.
Our certified technicians complete most heat pump installations in one day. We show up prepared with the right equipment, parts, and expertise to get your system running correctly the first time. No return visits. No surprises.
Shavano Park homeowners trust us because we don’t oversell or cut corners. We size your system based on your home’s actual square footage, insulation, and layout—not what’s easiest to install. That’s how you get 15-20 years of reliable performance instead of constant repairs and high utility bills.
We start with a free consultation at your Shavano Park home. One of our technicians assesses your current system, measures your space, and calculates your exact heating and cooling needs. No guesswork. No pressure.
Next, we provide a detailed quote that breaks down everything—equipment costs, labor, and any ductwork modifications needed. You’ll know exactly what you’re paying for before we start. Most heat pump system installations in Shavano Park take one full day to complete. If your existing ductwork is in good condition and properly sized, we typically finish in 6-8 hours.
Our team removes your old system, installs your new heat pump, and tests everything to make sure it’s running at peak efficiency. We handle all permits and ensure your installation meets local building codes. Before we leave, we walk you through your new system’s operation and answer any questions you have.
You’ll notice the difference on your very next utility bill. And if anything comes up down the road, we’re available 24/7 for emergency service throughout the San Antonio area.
Ready to get started?
Your heat pump installation in Shavano Park, TX includes everything needed for a complete, code-compliant system. We provide the heat pump unit sized specifically for your home, all refrigerant lines, electrical connections, and a new thermostat if needed.
We inspect and modify your existing ductwork to ensure proper airflow. Undersized or leaky ducts kill efficiency and comfort, so we seal any gaps and make necessary adjustments. This step matters more than most homeowners realize—it’s the difference between a system that performs as promised and one that underdelivers.
All installations come with manufacturer warranties on equipment and our workmanship guarantee. We also help you file for the federal tax credit, which covers 30% of your total installation cost including labor. That’s up to $2,000 back in your pocket.
Texas recently updated refrigerant requirements for all HVAC systems manufactured after January 1, 2025. Your new heat pump will use A2L refrigerants that meet current environmental standards. We handle all the technical details so you don’t have to think about compliance or future-proofing.
Shavano Park’s mild winters make heat pumps an ideal choice for year-round comfort. You won’t need a backup heating system, and you’ll use significantly less energy than homes running traditional furnaces or electric resistance heat.
Heat pump installation in Shavano Park typically costs between $7,000 and $12,000 for a complete system. The final price depends on your home’s size, the system’s efficiency rating, and whether your ductwork needs modifications.
Larger homes—like the 2,600+ square foot average in Shavano Park—require more powerful units, which increases equipment costs. Higher SEER2 ratings mean better efficiency and lower operating costs, but they also cost more upfront. If your existing ducts are undersized, leaking, or in poor condition, we’ll need to repair or replace sections to ensure proper airflow.
The federal government offers a 30% tax credit on your total installation cost, including equipment and labor. That credit maxes out at $2,000 per home and runs through 2032. Most Shavano Park homeowners see their investment pay back within 3-5 years through energy savings alone, especially if they’re replacing an older, less efficient system.
Yes. Modern heat pumps work efficiently in temperatures down to about 25°F, and Shavano Park rarely sees temperatures that low. Your heat pump will keep your home comfortable throughout winter without backup heating.
Shavano Park sits in the Texas Hill Country where winter temperatures typically stay in the 30s at night and reach the 70s during the day. Heat pumps are designed for exactly this kind of climate. They pull heat from outdoor air and move it inside—even when it feels cold outside, there’s still enough heat energy for the system to work efficiently.
If you’re replacing an older furnace or electric resistance heating, you’ll actually notice better comfort and lower bills. Heat pumps run more consistently at lower fan speeds, which eliminates the hot-and-cold cycles you get with traditional systems. Breakdowns during winter are rare when the system is properly maintained, but if something does happen, we provide 24/7 emergency service throughout the San Antonio area.
Most heat pump installations in Shavano Park take one full day to complete. If your existing ductwork is in good condition and properly sized, we can typically finish in 6-8 hours.
The timeline depends on a few factors. Homes with older ductwork may need repairs or modifications to handle proper airflow, which adds time. If we’re replacing both indoor and outdoor units, that’s more involved than a simple swap. And if your electrical panel needs upgrading to handle the new system’s power requirements, we’ll coordinate that work as well.
We complete most installations in a single visit because we come prepared. Our trucks carry common parts, tools, and equipment so we’re not making multiple trips or leaving you without heating and cooling. You’ll have a fully functioning system by the end of the day, and we’ll walk you through everything before we leave.
The right size depends on your home’s square footage, insulation quality, ceiling height, window count, and sun exposure. We calculate the exact capacity during your free consultation—there’s no one-size-fits-all answer.
Oversized systems cost more upfront and cycle on and off too frequently, which wastes energy and wears out components faster. Undersized systems run constantly and never quite keep up, especially during extreme weather. Both scenarios leave you uncomfortable and paying more than you should.
We measure your space and run a load calculation that accounts for Shavano Park’s climate, your home’s construction, and how you use your space. Most homes in the 2,000-3,000 square foot range need a 3-4 ton unit, but that’s just a starting point. Proper sizing is one of the most important parts of the installation process—it determines whether your system performs as promised or becomes a constant source of frustration.
Yes. Heat pumps improve indoor air quality because they don’t burn fossil fuels inside your home, which means no combustion byproducts or carbon monoxide risk. They also filter air continuously as they run.
Traditional furnaces that burn natural gas or propane produce combustion gases that need to be vented outside. Even with proper venting, there’s always some risk of backdrafting or leaks. Heat pumps eliminate that concern entirely because they only move heat—they don’t create it through combustion.
Your heat pump’s air handler includes a filter that captures dust, pollen, and other airborne particles every time air circulates through the system. If you want even better filtration, we can install higher-grade filters or add air purification systems that work alongside your heat pump. Shavano Park’s location in the Hill Country means you’re dealing with cedar pollen and other allergens—better filtration makes a noticeable difference in how your home feels.
You should schedule professional maintenance twice a year—once before cooling season and once before heating season. Regular maintenance keeps your system running efficiently and prevents breakdowns when you need it most.
During a maintenance visit, we check refrigerant levels, clean coils, inspect electrical connections, test thermostat accuracy, and look for any signs of wear or potential problems. We also clean or replace filters and make sure your ductwork isn’t leaking. These checks take about an hour and catch small issues before they become expensive repairs.
Shavano Park’s mild climate is easier on HVAC equipment than extreme cold or heat, but your system still works year-round. Dust, pollen, and normal wear add up over time. Homeowners who skip maintenance typically see higher energy bills, shorter equipment life, and more frequent repairs. With proper care, your heat pump should last 15-20 years and maintain its efficiency throughout that time.
Local Resources
Other Services we provide in Shavano Park
Call Now
