You know something’s wrong when one bedroom feels like an oven while the living room is freezing. Or when your energy bill keeps climbing even though you’re not running the AC any harder than usual. That’s what happens when ductwork leaks, disconnects, or was never installed correctly in the first place.
Proper air duct installation fixes that. You get consistent temperature in every room because conditioned air actually reaches where it’s supposed to go. Your system doesn’t have to work as hard, which cuts your energy costs by 20-40% in most homes. And you’re not circulating dust, allergens, and outdoor pollutants through rooms where your family sleeps and eats.
Metal ductwork designed for South Texas conditions handles the humidity that causes mold and the heat that stresses connections. It lasts 50+ years when installed right. You’re done worrying about hot spots, high bills, and whether the air you’re breathing is clean.
We’re a -owned company that’s been handling HVAC work across San Antonio and surrounding areas like Elmendorf for over 20 years. We’re not a national chain. We’re local, and we understand what South Texas climate does to ductwork.
Elmendorf sits right in the path of extreme heat and humidity swings that most systems aren’t built to handle long-term. We’ve seen what happens when ductwork gets installed by someone who doesn’t account for those conditions. Connections fail. Seals break down. Mold grows in places you can’t see.
Our team includes certified, licensed technicians who’ve done this work long enough to know what holds up and what doesn’t. We handle permits, inspections, and code compliance because that’s part of doing the job right. And we’re available 24/7 when something goes wrong at the worst possible time.
First, we assess your home’s layout and your HVAC system’s capacity. That tells us how much airflow each room needs and what size ducts will deliver it. We’re looking at square footage, ceiling height, insulation, and how your existing system performs.
Next, we map out the duct runs. This isn’t guesswork—it’s about minimizing bends, keeping runs as short as possible, and making sure every connection is accessible for future maintenance. We use metal ductwork because it lasts longer and handles Texas heat better than flexible alternatives.
Installation typically takes one to two days for most residential jobs. We cut in the main trunk lines, branch out to individual rooms, seal every joint, and insulate where needed. Then we test airflow at each vent to confirm you’re getting proper distribution. You’ll notice the difference immediately—even temperatures, quieter operation, and air that actually feels clean.
Ready to get started?
You’re getting a complete system designed for your home’s specific needs. We don’t use one-size-fits-all approaches because homes in Elmendorf deal with unique challenges—extended cooling seasons that run seven to eight months, humidity that climbs past 90% in summer, and dust that works its way into everything.
Our installations include properly sized metal ductwork, sealed connections at every joint, insulation in unconditioned spaces like attics, and balanced airflow to each room. We handle all permit applications and coordinate inspections with local building departments. Every installation comes with a comprehensive warranty on parts and labor.
We also address indoor air quality during installation. That means sealing ducts so outdoor pollutants and attic dust don’t get pulled into your living spaces. In South Texas, where AC systems run almost year-round, the air quality inside your home matters. You’re breathing recirculated air most of the time, and leaky ductwork turns your system into a vacuum for everything you don’t want in your lungs.
Most residential air duct installations in Elmendorf run between $1,400 and $5,600 total, depending on your home’s size and layout. If you’re looking at cost per linear foot, expect $25 to $55 for professional installation with quality materials.
The range exists because every home is different. A 1,200 square foot single-story home with a straightforward layout costs less than a 2,500 square foot two-story with complex runs and multiple zones. Metal ductwork costs more upfront than flexible duct, but it lasts 50+ years instead of needing replacement every 15-25 years.
We give you an exact quote after assessing your home. That includes materials, labor, permits, and warranty. No surprises, no upselling once we start work. You’ll know what you’re paying before we touch anything.
Metal ductwork properly installed and maintained lasts 50+ years in South Texas. Flexible ductwork typically needs replacement every 15-25 years. The difference comes down to how materials handle heat, humidity, and constant use.
Elmendorf’s climate is hard on HVAC systems. You’re running AC seven to eight months a year, sometimes longer. Humidity causes corrosion on metal ducts that aren’t properly sealed and insulated. It also creates conditions for mold growth inside ducts, especially in unconditioned spaces like attics where temperatures swing dramatically.
That’s why installation quality matters as much as material choice. Properly sealed metal ductwork with insulation in the right places handles South Texas conditions without breaking down. You’re looking at decades of reliable performance instead of repairs and replacements every few years.
Yes. Properly installed and sealed ductwork typically cuts energy costs by 20-40% in homes with leaky or poorly designed systems. The U.S. Department of Energy estimates that leaky ducts can reduce HVAC efficiency by up to 20% on their own.
Here’s what happens: when your ducts leak, conditioned air escapes into attics, crawl spaces, and wall cavities instead of reaching the rooms you’re trying to cool. Your AC runs longer cycles to compensate, using more electricity to achieve the same temperature. You’re paying to cool spaces you don’t live in.
New ductwork eliminates those leaks. Every cubic foot of cooled air your system produces actually reaches your living spaces. Your AC runs shorter cycles, uses less electricity, and maintains more consistent temperatures. Most homeowners see the difference in their first full month of bills after installation.
Yes. Any new ductwork installation or major modification requires permits and inspections to ensure the work meets local building codes. This protects you by ensuring the installation is safe and done correctly.
We handle all permit applications and coordinate inspections as part of our service. You don’t need to visit any offices or deal with paperwork. Our licensed technicians know exactly what local inspectors look for and what code requirements apply to residential ductwork in this area.
Skipping permits is a risk some contractors take to save time or cut costs. It’s not worth it. If you ever sell your home, unpermitted work can delay or kill the sale. And if something goes wrong—a fire, an insurance claim—unpermitted work gives insurance companies a reason to deny coverage. We do it right from the start.
If your ductwork is more than 15-20 years old, you’re dealing with uneven temperatures in different rooms, or your energy bills keep climbing, it’s time for a professional assessment. Some situations call for targeted repairs. Others need complete replacement.
Signs you likely need new ductwork: visible damage like holes or disconnected sections, heavy dust buildup around vents, musty odors when the AC runs, or rooms that never reach the temperature you set. If your ducts were installed with flexible material and they’re approaching 15 years old, replacement makes more sense than ongoing repairs.
We’ll give you an honest assessment. If repairs will solve your problem, we’ll tell you that. If you’re throwing money at a system that’s past its useful life, we’ll explain why replacement is the better investment. You make the call based on complete information, not a sales pitch.
Yes. We regularly install complete duct systems in older Elmendorf homes that were built with window units or no cooling at all. It’s more involved than replacing existing ductwork, but it’s absolutely doable.
The process starts with evaluating your home’s structure to determine the best routes for duct runs. We look for existing spaces we can use—attics, crawl spaces, closets, and wall cavities. Sometimes we need to create new pathways, which might involve minor modifications to access spaces. We map everything out before we start so you know exactly what’s involved.
Installation in a home without existing ductwork typically takes two to three days. You’ll need to coordinate with an electrician if you’re also adding a new HVAC system. But once it’s done, you have whole-home comfort instead of fighting with window units that cool one room while the rest of the house bakes. It’s a significant upgrade that changes how livable your home feels during South Texas summers.
Local Resources
Other Services we provide in Elmendorf
Call Now
