You’re tired of uneven heating, sky-high electric bills, and wondering if your system will make it through another winter. Elmendorf homes face a unique challenge: summers that hit 97°F and winters that can drop to freezing, sometimes with power outages thrown in.
A properly installed heating system changes everything. Your rooms stay consistently warm without cranking the thermostat. Your energy bills drop because the system isn’t fighting itself. And when the next cold snap hits—or worse, when the grid goes down—you’re not scrambling for space heaters and blankets.
Modern heat pumps can cut your heating and cooling costs by up to 40% compared to older systems. That’s real money back in your pocket every month. But only if the system is sized correctly and installed right the first time. Too many contractors guess at sizing or rush the install, leaving you with hot spots, cold rooms, and equipment that fails early.
We’ve spent over 30 years installing heating systems across San Antonio, Houston, and Austin. We’re veteran-owned, which means we approach every job with discipline and attention to detail that matters when your family’s comfort is on the line.
We’ve seen what happens when heating systems fail during Texas cold snaps. We’ve responded to emergency calls at 2 AM when temperatures dropped and power went out. That’s why we size every system using Manual J load calculations—not guesswork—and install with Texas climate demands in mind.
Elmendorf sits just outside San Antonio, where homes need systems that can handle both scorching summers and those rare but dangerous winter freezes. We know the local building requirements, the soil conditions that affect ductwork, and exactly which systems hold up best in Bexar County’s climate.
First, we come to your home and actually measure things. We calculate your heating load based on square footage, insulation levels, window placement, and how your home is oriented. This isn’t a 15-minute walkthrough—it’s a proper assessment that determines the right system size for your specific home.
Next, we give you a clear quote. No hidden fees, no surprise charges later. You’ll know exactly what equipment we’re installing, what the labor costs, and what rebates or tax credits you qualify for. Right now, Texas homeowners can get up to $14,000 in rebates for switching to electric heat pumps, plus federal tax credits up to $2,000. We help you navigate that paperwork.
Installation typically takes one day for most Elmendorf homes. We protect your floors and workspace, remove your old system properly, and install the new equipment according to manufacturer specs—not shortcuts. We test everything before we leave: airflow, refrigerant levels, thermostat calibration, and backup heat operation.
After install, we walk you through how your new system works. You’ll know how to adjust settings for maximum efficiency, what maintenance to expect, and how to reach us 24/7 if something goes wrong.
Ready to get started?
Your heating system installation in Elmendorf, TX includes proper equipment sizing using Manual J calculations—not the lazy “rule of thumb” that leaves you with an oversized or undersized system. You get equipment that matches your home’s actual heating demands.
We install systems designed for Texas climate extremes. Heat pumps are outselling gas furnaces across the country now, and Texas leads the nation with over 2.16 million heat pumps already installed. They’re efficient, reliable, and perfect for our mild winters and hot summers. We can also integrate backup heating for those rare times when temperatures drop below freezing and the power grid gets stressed.
You get transparent pricing upfront, comprehensive warranties on parts and labor, and help accessing available rebates. The Texas State Energy Conservation Office is launching rebate programs in mid-2025 with $690 million set aside for homeowners switching to efficient electric heating. We handle the paperwork so you actually get that money back.
Most importantly, you get 24/7 emergency service after installation. If something goes wrong during a cold snap or holiday weekend, we respond—typically within hours. Your heating system doesn’t stop working on a convenient schedule, and neither do we.
Most residential heating system installations in Elmendorf, TX take one full day from start to finish. That includes removing your old equipment, installing the new system, connecting ductwork, testing everything, and walking you through operation.
Larger homes or complex installations might take two days, especially if we’re upgrading ductwork or adding zoning controls. We’ll tell you the exact timeline during your assessment—before we start work—so you can plan accordingly.
The actual installation time matters less than doing it right. We don’t rush jobs to squeeze in more appointments. Every system gets proper sizing calculations, correct refrigerant charging, and thorough testing before we consider the job complete. That attention to detail is why our installations last 15-20 years instead of failing early like rushed jobs often do.
Heat pumps make more sense for most Elmendorf homes because they handle both heating and cooling in one system. Elmendorf’s climate rarely drops below freezing, which is perfect for heat pump efficiency. You’ll use the same equipment year-round, cutting your energy costs by up to 40% compared to separate heating and cooling systems.
Modern heat pumps work efficiently down to about 25°F. For the few nights each year when Elmendorf gets colder than that, we can add backup electric resistance heating or keep your existing furnace as a secondary system. This hybrid approach gives you efficiency most of the time and reliability during extreme cold.
Gas furnaces still make sense in some situations—if you already have gas lines, if your home has specific heating demands, or if you prefer gas heat. We’ll assess your home and explain which option saves you more money over time. The right answer depends on your specific situation, not what’s trendy or what we have in stock.
Texas homeowners can receive rebates up to $14,000 per home through the state’s HOMES and HEAR programs, launching mid-2025. These rebates apply when you switch to electric heat pumps or install qualifying ventilation and insulation improvements. The state set aside $690 million for these programs.
You can also claim federal tax credits up to $2,000 for installing energy-efficient heating equipment. These credits apply to qualifying heat pumps and high-efficiency furnaces installed in your primary residence. The federal credit is separate from state rebates—you can claim both.
We help you navigate the paperwork for both programs. Rebate applications require specific documentation about equipment efficiency ratings, installation details, and energy savings calculations. We provide everything you need and can submit applications on your behalf. The goal is making sure you actually receive the money you qualify for, not just telling you it exists.
Proper sizing requires a Manual J load calculation—a detailed assessment of your home’s heating and cooling needs based on square footage, insulation levels, window types, air leakage, and local climate data. This calculation determines exactly how much heating capacity your home requires.
Many contractors skip this step and use rough estimates like “one ton per 500 square feet.” That’s lazy and often wrong. Oversized systems cycle on and off too frequently, wasting energy and wearing out faster. Undersized systems run constantly and never quite keep you comfortable.
You’ll know your system is properly sized if every room reaches the same comfortable temperature without hot or cold spots, if the system runs in steady cycles rather than constant short bursts, and if your energy bills match or beat the efficiency ratings promised at installation. If you’re experiencing uneven temperatures or higher bills than expected, your current system is probably sized wrong. We can assess that during a free consultation.
We provide 24/7 emergency heating repair throughout Bexar County, typically responding within hours of your call. Our emergency service covers evenings, weekends, and holidays—including during winter storms when heating failures happen most.
During extreme weather events like the 2021 freeze, heating demand spikes and systems fail under stress. Many Texas homes have heat pumps backed by inefficient electric resistance heaters that draw massive power during extended cold, sometimes tripping breakers or failing completely. If that happens, we prioritize emergency calls and dispatch technicians as quickly as conditions allow.
The best protection is prevention. Before winter hits, we recommend scheduling maintenance to catch potential failures before they happen. We also discuss backup heating options during installation—whether that’s a secondary heat source, generator compatibility, or system designs that handle power interruptions better. You can’t control Texas weather or grid reliability, but you can control how prepared your heating system is.
Residential heating system installation in Elmendorf, TX typically ranges from $5,000 to $12,000 depending on system type, home size, and installation complexity. A basic heat pump for a 1,500 square foot home runs $5,000-$7,000. Larger homes or high-efficiency systems with advanced features cost $8,000-$12,000 or more.
That price includes equipment, labor, permits, and startup. It doesn’t include ductwork modifications, electrical upgrades, or removing old equipment in difficult locations—we’ll identify those costs during your assessment so there are no surprises later.
Factor in available rebates and tax credits. With up to $14,000 in state rebates and $2,000 in federal tax credits, your actual out-of-pocket cost drops significantly. A $7,000 installation might cost you $3,000 after rebates. We provide detailed quotes showing equipment costs, labor, and potential rebates so you understand exactly what you’re paying and what you’re saving over time through lower energy bills.
Local Resources
Other Services we provide in Elmendorf
Call Now
