You’re not just replacing ducts in your attic. You’re fixing the reason your AC runs constantly but never cools the back bedrooms. You’re sealing the gaps that pull in dust, allergens, and attic heat every time your system kicks on.
When we handle air duct installation in Olmos Park, TX, the difference shows up fast. Your energy bills drop because your system isn’t fighting against itself anymore. Rooms that used to feel stuffy in July stay comfortable without cranking the thermostat. The dust that settled on your furniture every other day slows down because your ducts aren’t pulling it in from the attic.
This isn’t about making your HVAC “better.” It’s about making your home livable during a Texas summer without paying $400 a month to cool it. Properly installed ductwork lasts 25 to 30 years, which means you’re done dealing with this for decades. That’s the outcome that matters.
We’re a veteran-owned HVAC company that’s been installing and replacing AC ducts across San Antonio, Houston, and Austin since 2005. We’re licensed through the Texas Department of Licensing and Registration, which means every duct modification we do is permitted, inspected, and code-compliant.
Olmos Park homeowners deal with specific challenges: older homes with outdated ductwork, attics that hit 150 degrees in summer, and humidity that turns poorly sealed ducts into mold factories. We’ve seen it all, and we know how to install systems that hold up in this climate. Our team handles the permits, the inspections, and the installation so you don’t have to manage contractors who cut corners or disappear halfway through the job.
First, we come out and assess your current ductwork. We’re looking at the layout, the condition of existing ducts, where the leaks are, and whether your attic has enough space for proper installation. You get a transparent estimate that breaks down materials, labor, and timeline. No surprises.
Once you approve the estimate, we pull the necessary permits and schedule the installation. Most jobs take one to three days depending on the size of your home. We remove old, failing ductwork if you’re replacing ducts in your attic, then install new ducts with proper sealing, insulation, and connections engineered for Texas heat and humidity.
After installation, we test airflow and pressure to make sure every room gets the cooling it’s supposed to. Then we schedule the final inspection with the city so everything’s documented and code-compliant. You’re left with a system that works the way it should have from day one.
Ready to get started?
You’re getting more than new ducts. We install insulated ductwork designed to handle the temperature swings and humidity levels common in Olmos Park, TX. Every connection is sealed to prevent air leaks, which is where most systems lose 20 to 30% of their cooled air before it even reaches your rooms.
We handle all permit acquisition and coordinate inspections with local building officials. That matters when you sell your home, because unpermitted ductwork can kill a deal or force you to rip everything out and start over. Our installations meet Texas building codes and NADCA standards, so you’re covered.
If your attic needs additional prep work like insulation upgrades or structural modifications to accommodate new ducts, we’ll identify that upfront. We also offer 24/7 emergency service if something goes wrong with your HVAC system during or after installation. The goal is a system that lasts 25 to 30 years without constant repairs or replacements.
Most homeowners in Olmos Park, TX pay between $1,400 and $5,600 for complete air duct installation, depending on the size of the home and the complexity of the layout. The cost breaks down to about $25 to $55 per linear foot, or $270 to $500 per individual duct run.
Larger homes with multiple stories or complex HVAC systems will be on the higher end of that range. Smaller homes or straightforward attic installations usually fall closer to $1,400 to $3,000. The price includes materials, labor, permits, and inspections.
If you’re replacing ducts in your attic and the old ductwork needs to be removed first, that adds to the labor time but not dramatically. We give you an upfront estimate that covers everything so you know exactly what you’re paying before we start. Financing options are available if you need to spread out the cost.
Most attic duct replacements take one to three days depending on the size of your home and the condition of your existing system. A straightforward job in a 1,500-square-foot home with easy attic access usually wraps up in one to two days. Larger homes or attics with limited access can take three days or slightly longer.
The timeline includes removing old ductwork, installing new insulated ducts, sealing all connections, and testing the system to make sure airflow is balanced across every room. We don’t rush the sealing process because that’s where most contractors cut corners, and it’s also where you lose the most energy if it’s done wrong.
We schedule the work to minimize disruption to your daily routine. You’ll have cooling throughout the process, though we may need to shut off your system for short periods during installation. Once we’re done, we coordinate the final inspection so everything’s documented and compliant.
Yes, but only if your current ducts are leaking or poorly insulated. If your ductwork has gaps, disconnected sections, or inadequate insulation, your HVAC system is losing 20 to 30% of its cooled air before it reaches your living spaces. That means your AC runs longer and harder to maintain the same temperature, which drives up your energy bills.
Properly installed and sealed ductwork eliminates those leaks. Your system cools your home faster and shuts off sooner because the air actually reaches the rooms it’s supposed to. Most homeowners see energy bill reductions of 20 to 30% after replacing failing ductwork, which can translate to $50 to $150 in monthly savings during peak summer months in Olmos Park, TX.
The payback period depends on how bad your old ducts were and how much you’re currently spending on cooling. For most homes, the investment pays for itself within three to five years through energy savings alone.
Yes. Any ductwork modification in Texas requires a licensed contractor and proper permits through your local building department. This includes replacing ducts in your attic, adding new duct runs, or modifying existing layouts.
Permits exist to make sure the work meets building codes and safety standards. If you skip the permit process, you’re risking major problems when you sell your home. Buyers’ inspectors will flag unpermitted HVAC work, and you’ll either have to rip it out and redo it with permits, or lose the sale entirely.
We handle all permit acquisition and coordinate inspections as part of our installation process. You don’t have to deal with the city or worry about compliance. Everything’s documented, inspected, and approved before we consider the job complete.
If your ductwork is over 15 years old, has visible damage, or your energy bills keep climbing despite regular AC maintenance, replacement is usually the better move. Repairs make sense for minor issues like small leaks or disconnected sections, but they’re a temporary fix if the underlying system is failing.
Signs you need full replacement include: uneven temperatures throughout your home, excessive dust even after cleaning, musty odors when the AC runs, or visible rust, holes, or collapsed sections in your attic ducts. Flexible ducts typically last only 5 to 10 years in Texas attics due to heat exposure, while rigid metal ducts can last 25 years but still fail if they’re poorly insulated or improperly installed.
We’ll assess your current system during the initial consultation and give you an honest recommendation. If repairs will get you another five years, we’ll tell you that. If you’re throwing money at a failing system, we’ll explain why replacement makes more sense long-term.
Insulated rigid metal ductwork or high-quality insulated flex duct both work well in Texas, but the installation quality matters more than the material. Rigid metal ducts last longer and handle high temperatures better, but they’re more expensive and harder to install in tight attic spaces. Insulated flex duct is more affordable and easier to route through complex layouts, but it needs to be installed without kinks or compression to maintain proper airflow.
For Olmos Park, TX homes, we typically recommend insulated metal ducts for main trunk lines and insulated flex duct for branch runs to individual rooms. This gives you durability where it matters most while keeping costs reasonable. The insulation prevents condensation buildup in humid conditions and reduces heat gain from your attic, which can reach 150 degrees in summer.
Proper sealing is just as important as material choice. We use mastic sealant on all connections instead of standard duct tape, which degrades quickly in attic heat. Every joint is sealed and tested to make sure you’re not losing cooled air through gaps.
Local Resources
Other Services we provide in Olmos Park
Call Now
