You’re not just replacing a broken unit. You’re ending the cycle of expensive repairs, sky-high electric bills, and wondering if your system will make it through another Texas summer.
A proper AC system replacement in Adkins, TX means right-sized equipment for your home, professional installation that actually follows manufacturer specs, and efficiency that can cut your cooling costs by 20-40%. That’s not marketing talk—that’s what the Department of Energy says happens when you upgrade from an older system to a modern, high-efficiency unit.
You’ll notice the difference immediately. Rooms that used to stay warm finally cool down. Your thermostat stops fighting a losing battle. And when August rolls around and your neighbors are dealing with emergency breakdowns, your system just works.
We’ve been doing AC unit replacement in Adkins and throughout the San Antonio area for over two decades. The installations that hold up are the ones done right the first time—proper load calculations, correct refrigerant charge, sealed ductwork, and equipment that matches your home’s actual needs.
Texas Air Repair is a veteran-owned HVAC company that’s been serving Adkins, San Antonio, and the surrounding areas for over 20 years. We’re not a franchise or a call center—we’re a local team that answers our phones and shows up when we say we will.
Adkins sits in that stretch southeast of San Antonio where summer heat isn’t just uncomfortable, it’s relentless. We know what AC systems go through out here. The dust, the humidity swings, the 100+ degree days that last for months. Your equipment works harder than systems in most other parts of the country.
That’s why we don’t cut corners on installation. Our technicians are EPA-certified, our work is backed by real warranties, and we’ve earned an A+ rating with the Better Business Bureau by doing what we say we’re going to do. You’re not getting a sales pitch from us—you’re getting honest answers about whether you need a full replacement or if a repair makes more sense.
First, we come out and actually look at your system. Not every breakdown means you need a replacement. If your unit is newer and the repair makes financial sense, we’ll tell you. But if you’re looking at another expensive fix on an aging system, we’ll walk you through what replacement looks like.
We’ll measure your home, check your ductwork, and calculate the right size system for your space. Oversized units waste energy and break down faster. Undersized units run constantly and never keep up. We size it correctly because that’s what determines whether your new system lasts 10 years or 20.
Once you approve the estimate, we schedule the installation. Most air conditioning replacement jobs in Adkins, TX take one day. We remove your old equipment, install the new system, test everything, and make sure you understand how to use your new thermostat. Our trucks are fully stocked, so we’re not waiting on parts or making return trips.
Before we leave, we walk you through the warranty, show you where your filters are, and give you our direct number. If something doesn’t feel right after we’re gone, you call us—not a call center.
Ready to get started?
Every AC replacement includes proper load calculation, refrigerant charge verification, ductwork inspection, and airflow testing. These aren’t extras—they’re the baseline for an installation that works the way it’s supposed to.
We also look at your indoor air quality during replacement. Adkins is a rural community, which means more dust, pollen, and outdoor contaminants making their way inside. If your ductwork is leaking or your filtration is outdated, your new system won’t perform the way it should. We’ll tell you what needs attention and what can wait.
You’ll get a system that’s matched to Texas heat. We install units built for climates like ours—high SEER ratings, two-stage or variable-speed compressors, and components that hold up under constant use. The brands we carry aren’t the cheapest, but they’re the ones we trust to last.
We also set you up with a smart thermostat if you want one. It’s not required, but most customers appreciate being able to control their system remotely and track energy usage. It’s one of those upgrades that pays for itself faster than you’d think, especially during peak summer months when every degree matters on your electric bill.
If your system is under 10 years old and the repair costs less than a third of what replacement would run, fixing it usually makes sense. But if you’re looking at a major component failure—compressor, evaporator coil, condenser—and your unit is 12+ years old, you’re often better off replacing it.
Here’s the math we walk customers through: if the repair costs $2,000 and your system is 15 years old, you’re putting serious money into equipment that’s already on borrowed time. You might get another two years out of it, or it might fail again next summer. A new system costs more upfront, but you’re getting 10-15 years of reliable cooling, lower energy bills, and a warranty that actually covers you.
We’ll never push you toward a replacement if a repair makes sense. But we also won’t let you spend money on a fix that’s just delaying the inevitable. We’ll show you both options, explain what each one gets you, and let you decide.
Size isn’t about square footage alone—it’s about heat load. Your home’s insulation, window placement, ceiling height, ductwork condition, and even which direction it faces all affect how much cooling capacity you actually need. That’s why we do a Manual J load calculation before recommending a system.
Most homes in Adkins fall somewhere between 2.5 and 5 tons, but we’ve seen plenty of exceptions. A 2,000 square foot home with great insulation and newer windows might need a smaller unit than a 1,600 square foot home with poor insulation and west-facing glass.
An oversized unit will cool your house fast but won’t run long enough to remove humidity. You’ll feel cold and clammy. An undersized unit will run nonstop and never quite catch up on hot days. Right-sizing matters more than most people realize, and it’s one of the things we won’t compromise on during installation.
Most full system replacements in Adkins run between $8,000 and $15,000 depending on the size of your home, the efficiency level you choose, and whether your ductwork needs work. That’s for a complete changeout—outdoor condenser, indoor air handler or furnace, thermostat, and proper installation.
Higher SEER ratings cost more upfront but save you money every month on your electric bill. A 14 SEER system is the minimum efficiency allowed in Texas. A 16-18 SEER system costs a bit more but can cut your cooling costs significantly over the life of the unit. We’ll show you the price difference and the estimated payback period so you can make an informed decision.
We give you upfront pricing before any work starts. No surprises, no hidden fees. If we find something during installation that changes the scope—like ductwork that needs repair—we’ll stop and talk to you before moving forward. You’ll know exactly what you’re paying for and why.
Most installations take one full day, usually 6-8 hours depending on the complexity of your system and whether we’re working with existing ductwork or making modifications. We’ll give you a more specific timeline when we assess your home, but plan on us being there for the better part of a day.
We start by removing your old equipment and prepping the installation area. Then we set the new outdoor unit, install the indoor components, connect refrigerant lines, wire everything up, and test the system. We’re not rushing—we’re making sure every connection is tight, every measurement is right, and everything works before we leave.
If your ductwork needs significant repair or if we’re upgrading electrical service, it might take longer. We’ll let you know upfront if that’s the case. Our trucks are fully stocked with common parts and materials, so we’re rarely held up waiting on supplies. When we schedule your installation, we’re showing up ready to finish the job that day.
If you’re replacing a system that’s 10+ years old, yes—you’ll see a noticeable drop in your cooling costs. The Department of Energy estimates that newer systems can reduce cooling expenses by 20-40% compared to older units, assuming proper installation and regular maintenance.
The efficiency gains come from better compressor technology, improved heat exchange, and tighter tolerances in manufacturing. A modern 16 SEER system uses significantly less electricity than a 10 SEER unit from 2010. Over a Texas summer where your AC runs almost constantly, that difference adds up fast.
But here’s what matters just as much as the SEER rating: proper installation. An efficient system that’s incorrectly charged, poorly sealed, or connected to leaky ductwork won’t deliver the savings you’re expecting. That’s why we don’t skip steps. You’re paying for equipment that’s designed to save you money—we make sure it actually does.
Yes. We offer same-day service for most calls, and we understand that AC failures don’t wait for convenient times. If your system dies in the middle of a heat wave and replacement is the only option, we’ll do everything we can to get you back up and running fast.
Emergency replacements sometimes mean working evenings or weekends, and we’re set up to handle that. We keep our trucks stocked and our schedule flexible during peak summer months because we know how urgent these situations are. Texas heat isn’t just uncomfortable—it’s a safety issue, especially for kids, elderly family members, or anyone with health conditions.
We’ll still do the job right. Even in an emergency, we’re not skipping load calculations or rushing through installation steps that matter. But we will prioritize your call, move things around if needed, and get a crew out to you as quickly as possible. Call us directly at our main number and let us know it’s an emergency—we’ll take care of you.
Local Resources
Other Services we provide in Adkins
Call Now
