You’re not looking for a relationship. You need your furnace working before tonight’s low hits 35 degrees.
That means a technician who answers the phone, shows up on time, and diagnoses the problem without upselling you on equipment you don’t need. Most heating repair in Somerset, TX gets handled the same day we arrive. We carry common parts on the truck, so you’re not waiting three days for an order to come in while your family piles on blankets.
When we’re done, your system works. Your energy bill doesn’t spike because of a half-fixed problem. And if something needs replacing, we’ll tell you why and show you the failed part—not just hand you a quote and hope you trust us.
Texas winters aren’t predictable anymore. You’ve seen what happens when the grid fails and temperatures drop. A working furnace isn’t a luxury—it’s how you keep your family safe when the next cold snap rolls through Somerset.
We’ve been handling HVAC heating repair across Somerset, San Antonio, Austin, and Houston for over 20 years. We’re veteran-owned, which means we take deadlines seriously and we don’t ghost you after the invoice clears.
Our technicians are licensed, insured, and EPA-certified. That’s not marketing talk—it’s the baseline for working on your heating system safely. We’ve seen what happens when unlicensed contractors cut corners, and we’ve fixed plenty of those jobs after the fact.
Somerset sits in a climate zone where you need both AC and heat to survive the year. We know the systems that hold up here, the parts that fail first, and how to keep your furnace running efficiently without burning through your winter energy budget. If you’re dealing with an older system, we’ll tell you whether it’s worth repairing or if you’re throwing money at something that’s going to fail again in three months.
You call or submit a request. We answer—not an answering service, not a voicemail box. If it’s an emergency, we prioritize it. If it’s routine maintenance or a non-urgent repair, we schedule you for the next available slot, usually within 24 hours.
Our technician arrives in a marked truck with diagnostic tools and common replacement parts already loaded. We don’t show up empty-handed and then tell you we need to come back. The first thing we do is listen to what you’ve noticed—strange sounds, weak airflow, the system cycling on and off. Then we run a full diagnostic on your furnace or heat pump to find the actual problem, not just the symptom.
Before we touch anything, you get a clear quote. We explain what’s broken, why it failed, and what it’ll take to fix it. If there are multiple options—like repair vs replace—we walk through the costs and tradeoffs so you can make the call. No pressure, no scare tactics.
Once you approve the work, we handle the repair and test the system to make sure it’s heating properly. We clean up, answer any questions you have about operating your system efficiently, and leave you with a receipt that breaks down exactly what we did. If something’s still not right, you call us back and we make it right.
Ready to get started?
Every heating repair in Somerset, TX starts with a full system diagnostic. We check your thermostat calibration, inspect the heat exchanger for cracks, test the ignition system, measure airflow, and examine electrical connections. If you’ve got a heat pump, we check refrigerant levels and the reversing valve. For furnaces, we inspect the burner assembly and flue for safety issues like carbon monoxide risk.
Somerset’s climate means your system works harder during those extreme cold snaps we’ve been seeing more often. A furnace that’s been running fine in 50-degree weather can fail fast when temperatures drop into the 20s for days straight. We look for wear patterns that signal your system’s struggling before it leaves you without heat during the next winter storm.
You also get honest guidance on efficiency. Modern high-efficiency systems can cut your heating costs by 20 to 40 percent compared to older units. For a typical Somerset home spending $200 a month on heating during winter, that’s real money—$40 to $80 monthly savings. If your furnace is over 15 years old and needs a major repair, we’ll run the numbers with you so you can see whether fixing it makes sense or if you’re better off replacing it before it fails completely.
We handle all types of residential heating systems—gas furnaces, electric furnaces, heat pumps, and dual-fuel setups. And if your ductwork is leaking or your home has cold spots, we’ll let you know. A perfectly functioning furnace won’t heat your house properly if 30 percent of the warm air is escaping through unsealed ducts.
Most heating repairs in Somerset run between $150 and $500, depending on what’s broken. A simple fix like a faulty thermostat or tripped breaker sits on the low end. Replacing a blower motor, gas valve, or heat exchanger costs more because the parts themselves are expensive and the labor’s more involved.
The national average for HVAC repair is around $350, but that number doesn’t tell you much. What matters is what’s actually wrong with your system. We give you a clear quote before we start work, so you know exactly what you’re paying for.
If your furnace needs a repair that costs more than half the price of a new system—and it’s already 15 years old—we’ll tell you. Sometimes the smarter move is replacement, especially when you factor in the energy savings from a newer, more efficient unit. We’re not here to sell you a new furnace if a $200 repair gets you through another few winters, but we’re also not going to let you dump $1,500 into a system that’s going to fail again in six months.
Yes. We offer 24/7 emergency heating repair across Somerset and the surrounding area. If your heat goes out at 2 a.m. and it’s 28 degrees outside, that’s not something you wait until Monday to fix.
Emergency calls get prioritized. We can’t guarantee a 30-minute arrival time—we’re not going to lie to you about logistics—but we respond fast, and we’ll give you an honest ETA when you call. Most emergency heating repairs in Somerset get handled the same night or within a few hours, depending on the issue and what parts we need.
Emergency service does cost more than a scheduled appointment. That’s standard across the industry because you’re paying for after-hours availability and immediate response. But we don’t price-gouge you just because you’re in a tough spot. You’ll get the same transparent pricing and the same quality work you’d get during business hours.
If you’re dealing with a furnace that’s acting up but still producing some heat, we can sometimes schedule you for first thing the next morning and save you the emergency fee. We’ll talk through what you’re experiencing and help you decide if it can wait or if you need someone out there now.
If your furnace is under 10 years old and the repair costs less than a third of what a new system would cost, repair usually makes sense. If it’s over 15 years old, breaking down frequently, or needs a major component replaced, replacement is often the better move.
Here’s the math that matters: most furnaces last 15 to 20 years with proper maintenance. If yours is 17 years old and needs a $900 heat exchanger replacement, you’re putting $900 into a system that’s already near the end of its lifespan. A new high-efficiency furnace costs $3,000 to $5,000 installed, but it’ll run for another 15 to 20 years and cut your heating bills by 20 to 40 percent. Over five years, the energy savings alone can cover a big chunk of that upfront cost.
We’ll never push you toward a replacement if a repair makes sense. But we will walk you through the numbers so you can make an informed decision. Some repairs buy you another five years of reliable heat. Others are just delaying the inevitable while your energy bills stay high and you’re one cold snap away from another breakdown.
Also consider how often you’re calling for repairs. If you’ve had a technician out three times in the last two years, your furnace is telling you something. At that point, you’re nickel-and-diming yourself into a new system anyway—just in the most inconvenient way possible.
The most common issue we see is a furnace that won’t ignite or stay lit. That’s usually a faulty ignitor, a dirty flame sensor, or a gas valve problem. It’s fixable, and in most cases, we can handle it the same day with parts we carry on the truck.
Blower motor failures are also common, especially in systems that run hard during extreme temperature swings. Somerset’s climate puts stress on HVAC systems because you’re switching between heating and cooling throughout the year, and those transition periods wear out components faster. A failing blower motor will give you weak airflow or no airflow at all, even if the furnace is firing up.
Thermostat issues cause a lot of service calls that aren’t actually furnace problems. If your thermostat’s miscalibrated, has dead batteries, or is installed in a spot where it’s reading the wrong temperature—like near a drafty window—your system won’t heat properly even though there’s nothing wrong with the furnace itself. We check the thermostat first before we start tearing into your equipment.
Ductwork leaks are another big one, though most homeowners don’t realize it until we point it out. If your furnace is running constantly but your house stays cold, or if some rooms are warm and others are freezing, you’re likely losing heated air through gaps in your ducts. That’s not a furnace repair—it’s a duct sealing job—but it’ll tank your efficiency and spike your energy bill if you don’t address it.
Once a year, ideally in the fall before you need it. Annual maintenance catches small problems before they turn into expensive repairs or leave you without heat during a cold snap.
A standard heating tune-up includes cleaning the burners, checking the heat exchanger for cracks, testing the ignition system, inspecting electrical connections, measuring airflow, and making sure your system’s running safely and efficiently. It takes about an hour, and it’s the best way to extend the life of your furnace and avoid breakdowns during the coldest weeks of the year.
If you skip maintenance, your system works harder, uses more energy, and wears out faster. Dirt buildup on the burners or a clogged filter forces your furnace to run longer cycles to reach the temperature you want. That means higher energy bills and more stress on components like the blower motor and heat exchanger.
Maintenance also protects you from carbon monoxide risks. A cracked heat exchanger can leak carbon monoxide into your home, and you won’t know it’s happening unless you’re running a CO detector or a technician inspects the system. Over 50,000 Americans end up in the emergency room every year from carbon monoxide poisoning, and a lot of those cases come from malfunctioning heating systems that weren’t maintained.
We’re not going to tell you your furnace will explode if you skip a tune-up. But we will tell you that the service calls we run in January and February—when it’s 30 degrees outside and someone’s furnace just quit—are almost always for systems that haven’t been maintained in years.
Yes. We work on gas furnaces, electric furnaces, heat pumps, and dual-fuel systems. Our technicians are trained and certified on all major brands and system types, so whether you’ve got a 20-year-old Carrier furnace or a new Trane heat pump, we can diagnose and repair it.
Heat pumps are common in Somerset because they handle both heating and cooling, which makes sense in a climate where you need both. They’re efficient, but they have different failure points than furnaces—things like refrigerant leaks, reversing valve issues, and defrost cycle problems. We carry the tools and parts to handle those repairs without having to special-order components or bring in a subcontractor.
If you’ve got a dual-fuel system—where a heat pump handles most of the heating and a gas furnace kicks in during extreme cold—we service both sides of that setup. Those systems are great for efficiency, but they’re also more complex, and not every HVAC company knows how to troubleshoot them properly.
The only thing we don’t repair is old gravity furnaces or coal-fired systems, but those are rare in Somerset. If you’ve got something unusual, call us anyway. We’ll let you know if it’s something we can handle or if you need a specialist. We’re not going to waste your time pretending we can fix something we can’t.
Local Resources
Other Services we provide in Somerset
Call Now
