Texas winters don’t follow a schedule anymore. One week you’re running the AC, the next you’re dealing with overnight temps in the 20s. Your heating system needs to handle that without failing when you need it most.
A properly installed heating system does three things well: it keeps your family comfortable during cold snaps, it runs efficiently enough that your energy bills don’t spike every winter, and it lasts 15-20 years without constant repairs. That’s what you’re paying for when you invest in professional heating installation.
Modern heat pumps can cut your heating costs by 10-30% compared to older systems. That’s real money back in your budget every month. And when your system is sized correctly for your home and installed to manufacturer specs, you’re not dealing with uneven temperatures or a furnace that cycles on and off constantly.
We’ve been installing and servicing heating systems across the San Antonio area for over 20 years. We’re a veteran-owned, family-operated company that understands what Leon Valley homeowners deal with when it comes to HVAC.
We know your home was likely built before energy efficiency was a priority. We know Texas weather is unpredictable. And we know you’ve probably dealt with contractors who didn’t show up on time or tried to upsell you on equipment you didn’t need.
Our approach is straightforward: we assess your home’s actual heating needs, recommend systems that fit your budget and square footage, and install everything according to local building codes and manufacturer requirements. We’re licensed, bonded, and insured, and we offer 24/7 emergency service because heating failures don’t wait for business hours.
First, we come to your home and do a proper load calculation. That means measuring your square footage, checking your insulation, looking at your ductwork, and figuring out exactly what size system you need. Oversized systems waste energy and wear out faster. Undersized systems run constantly and never keep you comfortable.
Once we know what your home needs, we walk you through your options. We’ll explain the difference between furnaces and heat pumps, what efficiency ratings actually mean for your monthly bills, and what warranties cover. You’ll get a clear price before any work starts.
Installation typically takes one to two days depending on your system type. We remove your old equipment, install the new heating system, test everything to make sure it’s running at peak efficiency, and show you how to use your new thermostat. We clean up completely and haul away your old unit. Most importantly, we make sure your system is pulling the right airflow and hitting the temperatures it’s rated for before we leave.
Ready to get started?
Professional heating installation means more than just hooking up a new unit. You’re getting a system that’s properly sized for your home’s specific needs, installed according to manufacturer specifications, and optimized for Texas climate conditions.
Leon Valley homes face unique challenges. Many were built in the 70s and 80s when insulation standards were minimal. That means your heating system works harder than it should, and if it’s not installed correctly, you’re throwing money out the window. We check your ductwork for leaks, verify your insulation levels, and make sure your new system isn’t fighting against poor airflow or thermal loss.
Your installation includes a full load calculation, removal and disposal of your old equipment, installation of your new heating system with all necessary electrical and gas connections, thermostat setup and programming, airflow testing and balancing, and a complete walkthrough of your new system’s operation and maintenance requirements. You also get manufacturer warranties on equipment and our labor warranty on the installation work.
We’re available 24/7 for emergency heating repairs because we know system failures don’t wait for convenient times. And because we’ve been serving the Leon Valley area for over two decades, we understand local building codes and permit requirements.
Heating system installation in Leon Valley typically ranges from $3,500 to $8,000 for a standard furnace, and $4,500 to $12,000 for a heat pump system. The actual cost depends on your home’s square footage, the efficiency rating you choose, and whether your ductwork needs modifications.
Higher efficiency systems cost more upfront but save you money on energy bills every month. A 95% AFUE furnace uses less gas than an 80% AFUE model, which means lower heating costs during those unpredictable Texas cold snaps. Heat pumps can save you up to $300 annually compared to traditional heating systems.
We give you a clear, written estimate before any work begins. No surprises, no hidden fees. And we’ll explain exactly what you’re paying for so you can make an informed decision about what fits your budget and your home’s needs.
Heat pumps make more sense for most Leon Valley homes because they handle both heating and cooling, and they’re more efficient in our mild winter climate. Texas doesn’t get cold enough for long enough periods to justify a traditional furnace in most cases.
Heat pumps work by moving heat rather than generating it, which uses less energy. They’re effective down to about 25-30 degrees, which covers the majority of Leon Valley winter weather. When we do get those rare hard freezes, modern heat pumps have backup heating elements that kick in automatically.
That said, if you have an older home with existing gas lines and ductwork designed for a furnace, or if you’re replacing a system that’s still working but just old, sticking with a furnace might be more cost-effective. We’ll assess your specific situation and recommend what actually makes sense for your home, not what makes us the most money.
Most heating system installations take one full day for a straightforward replacement, or up to two days if we’re modifying ductwork or upgrading electrical service. We’ll give you an accurate timeline during your estimate based on what your specific installation requires.
A standard furnace or heat pump replacement where we’re swapping out an old system with a similar new one usually takes 6-8 hours. That includes removing your old equipment, installing the new system, connecting all electrical and gas lines, testing everything, and making sure your thermostat is programmed correctly.
If your home needs ductwork modifications, electrical panel upgrades, or if we’re installing a different type of system than what you had before, expect two days. We don’t rush installations because shortcuts lead to problems down the road. Your system needs to be installed right the first time so it runs efficiently and lasts its full 15-20 year lifespan.
The right size heating system for your Leon Valley home depends on your square footage, insulation levels, window quality, ceiling height, and how much sun exposure your home gets. There’s no one-size-fits-all answer, which is why we do a proper load calculation before recommending equipment.
A typical 1,500 square foot home in Leon Valley needs a 2-3 ton heat pump or a 60,000-80,000 BTU furnace. But if your home was built before 1990 and has minimal insulation, you might need a larger system. If you’ve upgraded to energy-efficient windows and added attic insulation, you might need less capacity than you think.
Oversized systems are just as problematic as undersized ones. They cycle on and off too frequently, which wastes energy and wears out components faster. Undersized systems run constantly and never quite keep your home comfortable. We measure everything, run the calculations, and size your system correctly so it performs efficiently and lasts longer.
Not always, but we inspect your ductwork during every installation to make sure it’s in good condition and properly sized for your new system. If your ducts are leaking, undersized, or poorly insulated, replacing your heating system without addressing those issues means you’re still wasting energy and money.
Duct leaks are common in older Leon Valley homes, and they can waste 20-30% of your heated air before it ever reaches your living spaces. We test for leaks using pressure diagnostics and seal any problems we find. Sometimes that’s a simple fix with mastic sealant. Other times, sections need to be replaced.
If you’re upgrading from an older, smaller system to a higher-capacity modern unit, your existing ductwork might not be sized correctly for the increased airflow. We’ll measure your ducts and let you know if modifications are needed. We don’t automatically recommend duct replacement because it’s expensive, but we also won’t install a new heating system on ductwork that’s going to undermine its performance.
Your new heating system should be professionally serviced once a year, ideally in the fall before you need it for winter. Annual maintenance catches small problems before they become expensive repairs and keeps your system running at peak efficiency.
During a maintenance visit, we inspect all electrical connections, test your thermostat calibration, check refrigerant levels if you have a heat pump, clean or replace filters, inspect your heat exchanger for cracks, test safety controls, and measure airflow. These checks take about an hour and typically cost $100-150.
Regular maintenance extends your system’s lifespan and maintains your manufacturer’s warranty. Most equipment warranties require proof of annual professional maintenance. Skip it, and you might void your warranty coverage. More importantly, neglected heating systems fail at the worst possible times, usually during the coldest nights when emergency service costs more and availability is limited.
Local Resources
Other Services we provide in Leon Valley
Call Now
