Your heating bills drop. Not by a little—by enough that you’ll notice it every month. Modern systems installed correctly can cut your heating costs significantly compared to what you’re paying now with an old, struggling furnace.
You stop worrying about whether your system will make it through the next cold snap. Selma gets those sudden temperature drops where it’s 70 degrees one day and 28 degrees the next morning. Your heating system needs to handle that without breaking down at 2 AM when your family’s trying to sleep.
The installation itself matters more than most people realize. The U.S. Department of Energy found that improper installation cuts efficiency by up to 30%. That means even an expensive, high-efficiency system will underperform and cost you more if it’s not sized and installed correctly. We measure your home, calculate the actual load, and install equipment that matches what you need—not what’s easiest to sell you.
We’ve been handling heating system installation in Selma, TX and throughout the San Antonio area for over 30 years. We’re veteran-owned, which means we approach every job with the same attention to detail and sense of duty that comes from military service.
We’re not the cheapest option you’ll find. But we’re licensed, bonded, and insured, and we stand behind every installation with comprehensive warranties on parts and labor. When you call us, you get transparent pricing before we start any work—no hidden fees, no surprise charges after the job’s done.
Selma homeowners deal with a specific climate challenge. You need heating that can handle both the mild 60-degree winter days and those occasional hard freezes that drop overnight temps into the 20s. We’ve been installing systems in this area long enough to know exactly what works and what doesn’t when those temperature swings hit.
First, we come out and actually look at your home. Not just your current system—your whole space. We measure square footage, check insulation, look at ductwork, and calculate the actual heating load your home needs. This prevents the most common mistake in HVAC: installing a system that’s either way too big or way too small.
Then we give you options. If you’re looking at heat pumps, we’ll explain the difference between a 14 SEER entry-level system and an 18 SEER mid-range unit. We’ll tell you what the upfront cost difference is and what you’ll save on your monthly bills. If a furnace makes more sense for your situation, we’ll walk through gas versus electric and what that means for your specific home.
Once you decide, we schedule the installation. Most residential heating system installation projects in Selma, TX take one to two days depending on whether we’re replacing an existing system or installing something new. Our certified technicians handle everything—removal of old equipment, installation of the new system, ductwork modifications if needed, thermostat setup, and a full system test before we leave.
After installation, we walk you through how everything works. You’ll know how to adjust settings, what sounds are normal, and what to watch for. We also offer 24/7 emergency service, so if something does go wrong during a cold snap, you’re not stuck waiting until Monday morning.
Ready to get started?
Every heating system installation in Selma, TX includes proper sizing and load calculation. This isn’t optional—it’s the foundation of an efficient system. We use Manual J calculations to determine exactly what size equipment your home needs based on insulation, windows, square footage, and local climate data.
You also get a full system that’s ready to run. That means new thermostats (or smart thermostat installation if you want it), all necessary ductwork modifications, electrical connections, gas line work for furnaces, refrigerant lines for heat pumps, condensate drainage, and a complete startup and calibration. We test everything before we leave.
Heat pumps are becoming more popular in Selma because one system handles both heating and cooling. The Department of Energy says modern air-source heat pumps can cut heating electricity use by up to 75% compared to older resistance heating. In Bexar County, that efficiency matters—especially when you’re running the system through those unpredictable winter months.
Right now, federal tax credits are available for qualifying high-efficiency systems. You can get up to $2,000 back through 2032 if you install an Energy Star certified heat pump. We’ll help you understand what qualifies and provide the documentation you need when you file. Between the tax credit and the monthly energy savings, a new system pays for itself faster than most people expect.
Heat pump installation in North Texas typically runs between $6,500 and $15,000 for a complete system, depending on efficiency level and your home’s specific needs. Entry-level 14 SEER heat pumps start around $4,200 to $6,500. Mid-range 16-18 SEER systems cost $7,500 to $11,000. Premium variable-speed units with 20+ SEER ratings run $12,000 to $18,500.
Gas furnace installation usually costs less upfront but depends on whether you already have gas lines run to your home. If you’re replacing an existing furnace, costs are lower. If we’re installing gas service for the first time, that adds to the total.
The actual price for your home depends on factors we can only determine in person: your home’s size, existing ductwork condition, insulation levels, and what type of system makes sense for your situation. We provide transparent, upfront pricing after we assess your home—no hidden fees or surprise charges after the work’s done.
Most residential heating system installation projects in Selma, TX take one to two days. If we’re doing a straight replacement—swapping out an old furnace or heat pump for a new one with minimal ductwork changes—we can often complete the job in one day.
More complex installations take longer. If your ductwork needs significant modifications, if we’re converting from one fuel type to another, or if we’re installing a system in a home that never had central heating before, expect two days or possibly more.
We don’t rush installations to hit an arbitrary timeline. Proper installation matters more than speed. That includes correct refrigerant charging for heat pumps, proper combustion setup for furnaces, sealed ductwork connections, and complete system testing before we leave. An extra few hours during installation prevents years of problems down the road.
Heat pumps make sense for most homes in Selma because they handle both heating and cooling in one system, and they’re extremely efficient in our climate. Selma doesn’t get cold enough, often enough, for heat pumps to struggle. Even when overnight temps drop into the 20s, modern heat pumps work fine—and they use up to 75% less electricity than older resistance heating.
Gas furnaces are worth considering if you already have gas service and you want the absolute warmest air coming from your vents. Furnaces produce hotter air than heat pumps, which some people prefer. They’re also slightly less expensive upfront in most cases.
The decision really comes down to your specific situation: what fuel sources you have available, whether you need a new air conditioning system too, what your monthly budget looks like, and how long you plan to stay in the home. We’ll walk through the actual numbers for your house—upfront cost, monthly operating cost, and available tax credits—so you can make an informed decision based on real data, not sales pressure.
The only way to know for sure is to run a Manual J load calculation on your specific home. This accounts for your square footage, insulation levels, window types, ceiling heights, number of occupants, and local climate data for Selma, TX. The calculation tells us exactly how many BTUs of heating capacity your home needs.
Most homes need between 30 and 60 BTUs per square foot for heating, but that range is too wide to be useful without knowing your home’s details. A poorly insulated 1,800 square foot home might need more heating capacity than a well-insulated 2,400 square foot home.
Sizing matters more than most people realize. An oversized system costs more upfront, cycles on and off too frequently, and wastes energy. An undersized system runs constantly, never quite gets your home comfortable, and wears out faster. We size systems based on calculations, not guesses—because getting this right affects your comfort and your bills for the next 15 to 20 years.
If you install a qualifying high-efficiency heat pump in 2026, you can get a federal tax credit worth up to 30% of the total installation cost, with a maximum credit of $2,000. The system needs to be Energy Star certified to qualify, and it needs to meet specific efficiency minimums.
These credits run through 2032 under current law, but the exact requirements and amounts can change. We stay current on what qualifies so we can help you understand your options. When we give you a quote, we’ll let you know if the system qualifies and provide the manufacturer documentation you’ll need when you file your taxes.
The tax credit is a real credit, not a deduction—meaning it reduces your actual tax bill dollar for dollar. Combined with the monthly energy savings from a high-efficiency system, the payback period is shorter than it’s been in years. If you’ve been putting off a heating system replacement, 2026 is one of the better years to do it.
Every heating system installation in Selma, TX includes comprehensive warranties on both parts and labor. Manufacturer warranties typically cover parts for 5 to 10 years depending on the brand and model. Our labor warranty covers the installation work itself.
If something goes wrong, you call us. We offer 24/7 emergency service, so you’re not stuck without heat during a cold snap waiting for business hours. Most heating issues can be diagnosed and repaired on the first visit, and because we installed the system, we already know exactly how it’s set up.
Proper installation dramatically reduces the chance of problems in the first place. When systems are sized correctly, installed by certified technicians, and tested thoroughly before we leave, they simply work. But equipment can fail, and when it does, you want a company that’s been in business for 30+ years and will actually answer the phone at 2 AM on a Sunday. That’s what you get with us.
Local Resources
Other Services we provide in Selma
Call Now
