When your HVAC system runs right, you stop thinking about it. The house stays comfortable without cranking the thermostat to 65. Your energy bill doesn’t spike every summer month. And you’re not lying awake wondering if the AC will make it through another Texas heat wave.
That’s what proper heating and cooling services in Kirby, TX actually deliver. Not just a quick fix that buys you another month, but a system that runs efficiently, breaks down less often, and lasts years longer than it would without professional attention.
You get same-day repairs when something goes wrong. You get transparent pricing before any work starts. And you get a veteran-owned team that’s been handling San Antonio’s brutal climate for over 20 years—so when we say your system can handle 75 days over 100 degrees, we’re not guessing.
Texas Air Repair is a veteran-owned HVAC company that’s been serving Kirby and the greater San Antonio area since 2005. We’re not a national franchise with rotating techs who don’t know the area. We’re local, licensed, and we’ve spent 20 years learning exactly what San Antonio’s climate does to HVAC systems.
When you’re dealing with 75+ days over 100 degrees and humidity that never quits, standard maintenance schedules don’t cut it. Systems here need attention twice a year, not once. Filters clog faster because of the dust and pollen. Drain lines back up more often because of the moisture. And when something breaks during a heat wave, you can’t wait three days for an appointment.
That’s why we stock our trucks with the parts that fail most often in this climate. That’s why we offer 24/7 emergency service. And that’s why most of our business comes from referrals—because when you do the job right the first time, people remember.
You call or submit a request online, and we schedule a time that actually works for you—usually same-day if it’s an emergency. We don’t give you a four-hour window and show up late. We give you a real timeframe and stick to it.
When our technician arrives, they’ll diagnose the problem and explain what’s wrong in plain language. No jargon, no upselling, no “well, you really should replace the whole system” unless that’s genuinely the best move. You’ll get upfront pricing before any work begins, so there are no surprises when the bill comes.
Most repairs get done the same visit because we keep common parts in stock. If we need to order something, we’ll let you know how long it’ll take and what your options are in the meantime. Once the work is finished, we test the system to make sure it’s running right, clean up after ourselves, and walk you through what we did.
If it’s a maintenance visit, we’ll check refrigerant levels, clean the coils, inspect the ductwork, replace filters, and catch small problems before they turn into expensive ones. You’ll get a full report on what we found and what (if anything) needs attention down the road.
Ready to get started?
We handle everything your heating and cooling system needs: AC repair and installation, furnace and heat pump service, duct cleaning and sealing, and indoor air quality solutions like humidifiers and air purifiers. Whether it’s your home or your business, we’ve got the equipment and experience to handle it.
In Kirby and the surrounding San Antonio area, AC isn’t optional—it’s a safety issue. When temperatures hit 103 degrees like they did this past May, a broken air conditioner can be dangerous, especially for kids, elderly family members, or anyone with health conditions. That’s why we offer 24/7 emergency service and keep technicians on standby during peak summer months.
We also know that energy bills in this climate can get out of control fast. A system that’s even slightly off can cost you hundreds of extra dollars every summer. Proper maintenance delivers 5-20% in annual energy savings, and catching problems early can extend your system’s lifespan from the typical 15 years to 30 years—even in a climate this demanding.
You’re not just getting a repair or a tune-up. You’re getting a local HVAC service provider in Kirby, TX that understands what systems face here, knows how to make them last, and shows up when you need us most.
A full AC replacement in Kirby typically runs between $4,500 and $8,000, depending on the size of your home, the efficiency rating you choose, and whether your ductwork needs any updates. A standard 3-ton unit for a 1,500-square-foot home usually falls in the $5,000 to $6,500 range with installation.
Higher-efficiency systems cost more upfront but can cut your energy bills by 20-30% over the life of the unit—which matters when you’re running AC almost year-round in San Antonio. If your current system is over 12 years old and repair costs are adding up, replacement often makes more financial sense than sinking money into an aging unit.
We’ll always give you honest numbers on both options. If a repair buys you another five years at a reasonable cost, we’ll tell you. If you’re throwing good money after bad, we’ll tell you that too.
In Kirby and the San Antonio area, you should service your HVAC system twice a year—once before summer and once before winter. That’s more frequent than the national standard, but San Antonio’s climate isn’t standard. When your AC runs 7-8 months straight and outdoor temperatures regularly hit 100+ degrees, systems work harder and wear out faster.
During a maintenance visit, we’ll check refrigerant levels, clean the coils, inspect electrical connections, test the thermostat, and replace filters. These visits catch small issues before they turn into expensive breakdowns—and they can extend your system’s lifespan by up to 15 years.
You should also change your filter monthly during heavy-use months instead of waiting the typical 90 days. San Antonio’s dust and pollen levels clog filters faster, and a clogged filter forces your system to work harder, which drives up energy costs and increases wear on the blower motor.
Yes. We offer 24/7 emergency HVAC repair in Kirby, TX because we know AC failures don’t wait for business hours. When your system goes out at 9 PM on a Saturday in July and it’s still 95 degrees outside, you can’t wait until Monday morning.
Emergency repairs do cost more than standard service calls—typically 50-100% more depending on the time and day. But when temperatures are dangerous and your family’s comfort and safety are on the line, fast response matters. We keep technicians on standby during peak summer months and stock our trucks with the most common parts so we can complete most repairs the same visit.
If you’re dealing with an emergency right now, call us. If your system is getting old and you’re worried about it failing during the next heat wave, schedule a maintenance visit. Catching problems early almost always costs less than emergency repairs.
We service and install all major HVAC brands including Carrier, Trane, Lennox, Rheem, Goodman, American Standard, York, and Bryant. If you’ve got a system that’s still running but needs repair, we can work on it regardless of the manufacturer—and we keep genuine parts in stock for the most common brands.
When it comes to new installations, we’ll recommend equipment based on your home’s size, your budget, and how much you’re willing to invest in energy efficiency. Higher-end brands like Carrier and Trane cost more upfront but tend to last longer and come with better warranties. Mid-range options like Rheem and Goodman offer solid performance at a lower price point.
What matters most isn’t the brand name—it’s proper sizing and professional installation. An oversized unit will short-cycle and waste energy. An undersized unit will run constantly and never keep up with San Antonio’s heat. We’ll calculate the right size for your home and install it correctly the first time.
If your system is over 12 years old and the repair costs more than 50% of what a new system would cost, replacement usually makes more sense. That’s the industry standard, and it holds up in practice. Once systems hit that age, repairs start adding up fast—and you’re still left with an inefficient unit that could fail again next month.
Here’s a practical example: if you’re looking at a $1,200 compressor repair on a 14-year-old system, and a new system costs $5,500 installed, you’re spending nearly 25% of replacement cost on a repair that doesn’t improve efficiency or reliability. You might get another two years out of it, or it might fail again next summer.
On the other hand, if your 8-year-old system needs a $300 capacitor replacement, that’s an easy call—fix it. We’ll always give you the honest math on both options, including what you’d save on energy bills with a newer, more efficient system. The decision is yours, but we’ll make sure you have the real numbers to make it.
The fastest way to lower your energy bills is to make sure your HVAC system is running efficiently. Change your filter monthly during summer, schedule maintenance twice a year, and keep your thermostat at 78 degrees when you’re home—every degree below that increases your cooling costs by about 3%.
If your system is over 10 years old, upgrading to a higher-efficiency unit can cut your cooling costs by 20-30%. Modern systems with SEER ratings of 16 or higher use significantly less energy than older 10-12 SEER units, and in a climate where AC runs almost year-round, those savings add up fast.
Other practical steps: seal any gaps around doors and windows, add insulation in your attic if it’s lacking, and consider a programmable thermostat that raises the temperature when you’re not home. Indoor air quality improvements like duct sealing can also help—if your ducts are leaking, you’re paying to cool air that never makes it into your living space. We can assess your system and tell you which upgrades will actually save you money.
Local Resources
Other Services we provide in Kirby
Call Now
