Your energy bills drop. Not by a little—by 40% to 70% depending on what you’re replacing. That’s real money back in your pocket every single month, and it adds up fast in a climate like ours where you’re running something year-round.
You stop juggling two systems. No more furnace for winter and AC for summer. One heat pump handles both, which means one system to maintain, one warranty to track, and half the service calls over the life of your equipment.
Your home stays comfortable without the temperature swings. Heat pumps distribute air more evenly than traditional HVAC systems, so you’re not dealing with hot spots upstairs or cold rooms in the morning. Just consistent comfort in every room, all year long.
The system lasts. A properly installed heat pump runs reliably for 15 to 20 years. But that lifespan depends entirely on the install—poor installation is the number one reason these systems fail early or underperform. Getting it right the first time matters.
Texas Air Repair is a veteran-owned HVAC company serving Terrell Hills, TX and the greater San Antonio area since 2003. We’ve installed, repaired, and maintained heat pump systems in homes just like yours—older properties with tricky ductwork, newer builds with modern electrical, and everything in between.
Our technicians are licensed, certified, and insured. Every install follows Texas Department of Licensing and Regulation standards, and we don’t cut corners on sizing, ductwork inspection, or electrical requirements. You’re not getting a one-size-fits-all quote—you’re getting a system properly matched to your home’s square footage, insulation, and layout.
Terrell Hills homes vary widely in age and construction. We’ve worked in pre-1990 properties that need duct modifications and panel upgrades, and we’ve handled straightforward replacements in newer construction. Either way, we give you a clear breakdown of what’s required and why before any work starts.
First, we assess your home. That means looking at your current system, measuring your space, checking your ductwork for leaks or sizing issues, and evaluating your electrical panel. If your ducts are leaking or undersized, that can cut efficiency by 20% to 40%—so we catch that upfront, not after the install.
Next, we size the system correctly. An oversized heat pump will short-cycle, wearing out components faster and leaving your home uncomfortable. An undersized system won’t keep up during extreme weather. We calculate the right tonnage based on your home’s actual load requirements, not guesswork.
Then we handle the installation. That includes setting the outdoor unit, connecting refrigerant lines, integrating with your existing or upgraded ductwork, wiring everything to code, and programming the thermostat. If your electrical panel needs an upgrade to handle the new load, we coordinate that too.
Finally, we test the system and walk you through operation. You’ll know how to adjust settings, what sounds are normal, and when to call for maintenance. We don’t leave until the system is running efficiently and you’re comfortable with how it works.
Ready to get started?
You get a full system that’s sized, installed, and tested to manufacturer specs. That includes the outdoor condenser unit, indoor air handler, refrigerant lines, thermostat setup, and all electrical connections. If ductwork modifications are needed, we handle that too—sealing leaks, resizing sections, or adding insulation where it’s missing.
In Terrell Hills, TX, many homes were built between the 1950s and 1980s. Older homes often need ductwork adjustments or electrical panel upgrades to support a modern heat pump system. We inspect for those issues during the assessment, so there are no surprises halfway through the job.
You also get access to available rebates. CPS Energy offers $100 to $275 per ton for qualifying heat pump installations, and we help you navigate that paperwork. With the federal tax credit expired as of 2026, utility rebates are your primary incentive—and they can offset a significant chunk of the upfront cost.
Every installation comes with a comprehensive warranty on parts and labor. We stand behind the work, and if something goes wrong due to installation error, we fix it at no cost to you. That’s not standard across the industry, but it should be.
For a standard residential heat pump installation in Terrell Hills, TX, expect to pay between $5,000 and $12,000 depending on system size, brand, and your home’s specific requirements. That range covers the equipment, labor, and basic installation.
Costs go up if your home needs ductwork modifications, which is common in pre-1990 construction. Adding or resizing ducts can add $2,000 to $4,000. If your electrical panel can’t handle the new system’s load, an upgrade runs $1,500 to $3,000. We identify those needs during the assessment so you have a complete picture before committing.
Rebates help. CPS Energy offers $100 to $275 per ton for qualifying systems, which can reduce your out-of-pocket cost by $400 to $1,100 depending on the size of your unit. We walk you through the rebate application as part of the install process.
Most residential heat pump installations in Terrell Hills, TX take one to two days. If it’s a straightforward replacement with no ductwork or electrical modifications, we can often complete it in a single day. More complex jobs—like homes that need duct sealing, panel upgrades, or significant layout changes—take closer to two full days.
We don’t rush the install to hit a timeline. Proper refrigerant line installation, duct sealing, and electrical connections take time to do correctly. Cutting corners here leads to efficiency losses, premature failures, and comfort issues down the road.
You’ll have heating and cooling throughout the process. We coordinate the work so your home isn’t without climate control overnight, which matters in Texas where temperatures can swing dramatically even in spring and fall.
Yes. Terrell Hills, TX has mild winters and hot summers, which is ideal for heat pump performance. Heat pumps work most efficiently in climates where winter temperatures rarely drop below freezing for extended periods. That describes our area perfectly.
During summer, a heat pump cools your home just like a traditional air conditioner—but it uses about half the electricity. During winter, it extracts heat from outdoor air and moves it inside, which is far more efficient than generating heat with electric resistance or gas combustion.
The only time heat pumps struggle is during prolonged freezes below 25°F, which is rare here. Even then, modern heat pumps have backup heating elements that kick in automatically. You’re not left in the cold, and the system still outperforms older furnace-and-AC combinations in overall annual efficiency.
System size depends on your home’s square footage, insulation quality, window count, ceiling height, and ductwork condition. A 1,500-square-foot home typically needs a 2- to 3-ton unit. A 2,500-square-foot home usually requires 3.5 to 5 tons. But those are rough estimates—accurate sizing requires a load calculation.
Oversizing is a common mistake. Contractors sometimes install a larger unit thinking it’ll cool or heat faster, but oversized systems short-cycle. They turn on, quickly satisfy the thermostat, then shut off before completing a full cycle. That wastes energy, increases wear on components, and leaves humidity high because the system doesn’t run long enough to dehumidify.
We perform a Manual J load calculation for every install. That accounts for your home’s specific characteristics and gives us the precise tonnage you need. It takes longer than guessing based on square footage, but it’s the only way to ensure your system runs efficiently and lasts its full lifespan.
Not always, but we inspect it thoroughly before installation. If your ducts are leaking, undersized, or poorly insulated, they can reduce your new system’s efficiency by 20% to 40%. At that point, you’re paying for a high-efficiency heat pump but not getting the performance you’re entitled to.
Common issues in Terrell Hills, TX homes include disconnected joints in attic ductwork, undersized return ducts, and insufficient insulation on ducts running through unconditioned spaces. Sealing leaks and adding insulation is often enough to bring ducts up to spec without full replacement.
Full duct replacement is necessary if the existing system is severely undersized, routed poorly, or damaged beyond repair. That’s more common in homes built before 1980 or properties that have had multiple HVAC replacements without ductwork updates. We give you a clear recommendation based on what we find during inspection, not what’s easiest for us to install.
Twice a year—once before cooling season and once before heating season. Heat pumps run year-round in Texas, so they accumulate more wear than systems that sit idle half the year. Regular maintenance catches small issues before they become expensive failures.
During a maintenance visit, we check refrigerant levels, clean coils, inspect electrical connections, test the thermostat calibration, and clear the condensate drain. We also check ductwork for new leaks and verify airflow is balanced throughout your home.
Skipping maintenance voids most manufacturer warranties and shortens system lifespan significantly. A well-maintained heat pump lasts 15 to 20 years. A neglected one starts failing around year 10. The cost of two annual maintenance visits is far less than replacing a system years early because minor issues went unaddressed.
Local Resources
Other Services we provide in Terrell Hills
Call Now
