Your energy bill shouldn’t spike every summer because your ductwork can’t handle San Antonio’s heat. When ducts leak or sag, your AC works overtime cooling your attic instead of your home. That’s 20-40% of your conditioned air disappearing before it reaches you.
Proper air duct installation in San Antonio, TX means every room stays the same temperature. No more hot spots in the back bedrooms. No more cranking the thermostat down because one room won’t cool. Your system runs less, lasts longer, and costs less to operate.
You’ll notice cleaner air within weeks. Sealed ductwork keeps San Antonio dust out of your system and off your furniture. Families with allergies breathe easier. Your HVAC filter stays cleaner longer. The whole house feels different when your ducts actually do their job.
We’ve spent over 20 years replacing ac ducts in San Antonio homes. We’re veteran-owned, locally operated, and we’ve seen what happens when ductwork isn’t designed for 75 days over 100 degrees and humidity that swings from 50% to 85%.
Most contractors use national checklists that don’t account for limestone dust, hard water calcification, or the way Texas heat beats down on attic ductwork for eight months straight. We engineer every system for San Antonio specifically. That means materials that handle humidity, sealing methods that last, and sizing that matches your home’s actual cooling load.
Our team handles permits, coordinates inspections, and makes sure your installation meets local building codes. You get metal ductwork that performs for 50+ years, not flex duct that sags and tears within 15. We’re licensed, insured, and available 24/7 when you need us.
We start with a Manual D calculation based on your home’s square footage, insulation, window placement, and room layout. This tells us exactly how much airflow each room needs and what size ducts will deliver it. No guessing. No using the same template for every house.
Next, we map the duct path through your attic or crawlspace. We’re looking for the most efficient route that avoids sharp bends, minimizes length, and keeps ducts inside conditioned space whenever possible. Then we remove your old ductwork completely—no patching over problems.
Installation takes one to three days depending on your home’s size and layout. We seal every joint with mastic, not tape. We insulate properly. We balance airflow so each room gets what it needs. When we’re done, we test the system, handle final inspections, and walk you through what we did. You’ll feel the difference the first time your AC kicks on.
Ready to get started?
You get a complete system designed for your home. We calculate cooling load for every room, size ducts to match your HVAC capacity, and use metal ductwork that handles San Antonio’s climate. Our installations include proper insulation, mastic sealing at every joint, and support that prevents sagging over time.
We handle all permit applications and coordinate required inspections. Your installation meets local building codes and manufacturer specifications. That protects your home value and ensures your warranty stays valid if you ever need service.
San Antonio homes deal with unique challenges. Attic temperatures hit 150 degrees in summer. Humidity creates condensation. Limestone dust clogs poorly sealed systems. We account for all of it. Your ductwork gets engineered for the conditions it’ll actually face, not some generic national standard.
Our work comes with comprehensive warranties on parts and labor. You get 24/7 emergency support if something goes wrong. And you work with certified technicians who’ve been installing ductwork in San Antonio for decades, not a crew that rotates through every few months.
Most San Antonio homes pay between $1,400 and $5,600 for complete duct replacement. The range depends on your home’s size, how accessible your attic or crawlspace is, and what materials you choose. Pricing typically runs $35-$55 per linear foot for quality installation.
A 1,500 square foot home usually needs 150-200 linear feet of ductwork. A 2,500 square foot home might need 250-300 feet. Homes with complex layouts, multiple stories, or difficult attic access cost more because the work takes longer and requires more materials.
Metal ductwork costs more upfront than flex duct but lasts 50+ years instead of 15-25. That investment pays for itself through lower energy bills during San Antonio’s brutal cooling season. Most homeowners see 20-30% reductions in utility costs after replacing leaky ductwork. Over a decade, that adds up to thousands in savings.
Plan on one to three days for most residential installations. Single-story homes with accessible attics typically take one to two days. Two-story homes or properties with crawlspace ductwork might need three days, especially if we’re working around obstacles or dealing with limited access.
The timeline includes removing old ductwork, installing new runs, sealing and insulating everything, connecting to your HVAC system, and testing for proper airflow. We don’t rush. Shortcuts lead to leaks, poor performance, and callbacks.
Weather affects the schedule too. San Antonio summers mean attic temperatures over 140 degrees. We start early and take breaks to avoid heat exhaustion. That protects our crew and ensures quality work. You’ll have functional AC throughout the process—we don’t disconnect your system until the new ductwork is ready to go live.
If your ducts are more than 15 years old, leaking, or undersized for your new system, yes. New AC units are more efficient than older models, but they can’t perform if your ductwork wastes 30% of the conditioned air before it reaches your rooms.
Mismatched ductwork is one of the biggest reasons new AC systems underperform. You install a high-efficiency unit expecting lower bills, but your old ducts leak, sag, or can’t handle the airflow. The system runs constantly trying to compensate. You never get the efficiency you paid for.
Replacing both together makes sense financially too. You’re already paying for labor, permits, and attic access. Adding ductwork to an AC installation costs less than doing two separate projects. And you know the entire system is sized correctly, sealed properly, and designed to work together. That’s how you actually get the performance and savings new equipment promises.
Metal ductwork outperforms everything else in Texas. Galvanized steel or aluminum ducts handle heat, humidity, and temperature swings without sagging, tearing, or degrading. You’re looking at 50+ years of service life with minimal maintenance.
Flex duct is cheaper upfront but starts failing within 15-25 years. San Antonio’s attic heat breaks down the plastic and insulation. The duct sags between supports, creating low spots where condensation pools. Joints separate. Airflow drops. You end up replacing it twice in the time metal ductwork would’ve lasted.
Metal also handles San Antonio’s dust better. Smooth interior surfaces don’t trap particles the way ridged flex duct does. That means better airflow, cleaner air, and less strain on your HVAC system. The upfront cost difference is real, but metal pays for itself through longevity and performance. It’s the right choice if you’re staying in your home long-term.
Uneven temperatures are the clearest sign. If some rooms stay hot while others freeze, your ductwork isn’t distributing air properly. That happens when ducts leak, collapse, or were never sized correctly in the first place.
High energy bills point to duct problems too. When your AC runs constantly but your home never feels comfortable, conditioned air is escaping somewhere. Leaky ductwork in your attic means you’re cooling 140-degree space instead of your living room. That shows up on every utility bill.
Visible damage tells you everything. If you can access your attic and see disconnected joints, crushed sections, or ductwork hanging from supports, you need replacement. Dust around vents, musty smells, or excessive dust throughout your home also indicate leaks. We can test your system’s efficiency and tell you exactly how much air you’re losing. Most homes lose 20-30%, but we’ve seen systems waste 50% or more.
Yes. San Antonio requires permits for ductwork replacement to ensure installations meet building codes and safety standards. The permit process covers system design, materials, installation methods, and final inspection. It protects your home value and ensures your work is done right.
We handle all permit applications and coordinate inspections. You don’t deal with the city or worry about paperwork. Our team knows local requirements, what inspectors look for, and how to schedule everything efficiently. The permit cost is included in your project quote.
Skipping permits creates problems down the road. If you sell your home, unpermitted work shows up during inspections. Buyers walk away or demand price reductions. Insurance companies can deny claims if unpermitted work contributed to damage. And if something goes wrong, you have no recourse because there’s no official record of who did the work or whether it met code. Permits aren’t red tape—they’re protection for your investment.
Local Resources
Other Services we provide in San Antonio
Call Now
